Skip to main content

Posts

Showing posts from October, 2021

SECURITY FOR INPUT OUTPUT DEVICES

  PROTECTION FOR INPUT AND STORAGE DEVICES  THROUGH BITLOCKER DRIVE ENCRYPTION METHOD.   I    TODAYS DIGITAL AGE.  DATA IS THE NEW OIL.  SO DATA IS HIGHLY RECOMMENDED FOR PROTECTION.  JUST AS THE ELITE COMMUNITY OF COUNTRIES NEEDED PROTECTION SO DOES OUR COMPUTER STORAGE DEVICES NEEDS PROTECTION.  SO I AM GOING TO SHARE MY VIEWS ON PROTECTION OF DATA IN INPUT AS OUTPUT STORAGE DEVICE PROTECTION ALGORITHM KNOWN AS BITLOCKER DRIVE ENCRYPTION.    I WON’T BE EXPLAINING IT BUT I WILL SHOW YOU THE METHOD TO GET THE PROTECTION NEEDED FOR DATA IN OUTPUT AND INPUT STORAGE DEVICES.  SO LET US BEGIN… BITLOCKER DRIVE ENCRYPTION RUN à TYPE GPEDIT.MSC à   UNDER COMPUTER CONFIGURATION EXPAND ADMINISTRATIVE TEMPLATES à   EXPAND WINDOWS COMPONENTS à   SELECT BITLOCKER DRIVE ENCRYPTIONS à DOUBLE CLICK ON FIXED DATA DRIVE à DOUBLE CLICK ON ALLOW ACCESS TO BITLOCKER PROTECTED FIXED DATA DRIVES FROM EARLIER VERSION OF WINDOWS à   SELECT ENABLE à APPLY OK à   DOUBLE CLICK ON BA

HOW TO SET UP AN IP ADDRESS?

  HOW TO SET AN IP ADDRESS TO A COMPUTER? IP ADDRESS IS KNOWN BY THE NAME INTERNET PROTOCOL ADDRESS.   IT IS LIKE A POSTAL ADDRESS OF THE COMPUTER ON THE INTERNET. IT IS THE ADDRESS NEEDED BY A COMPUTER TO FIND ANOTHER COMPUTER IN INTERNET.   LETS   START LEARNING!!     NOW LETS PUT OURSELVES IN THE TOPIC ABOUT HOW TO SET AN IP ADDRESS TO A COMPUTER HERE ARE THE   STEPS NEEDED TO GIVE IP ADDRESS TO THE COMPUTER…..   STEP I   GO TO RUN à TYPE ncpa.cpl à   RIGHT CLICK ON ETHERNET OR LOCAL AREA CONNECTION à PROPERTIES à SELECT INTERNET PROTOCOL VERSION 4 (TCP/IPV4) à PROPERTIES   à USE THE FOLLOWING IP ADDRESS à   TYPE THE IP ADDRESS   à CLICK ON SUBNET MASK (THE SUBNET MASK WILL COME AUTOMATICALLY) à OK à CLOSE   GO TO RUN à CMD à PING 10.0.0.2   STEP II   TURN OFF WINDOWS FIREWALL GO TO RUN à WRITE firewall.cpl IN RUN à   CLICK ON TURN WINDOWS FIREWALL ON OR OF à   SELECT TURN OFF FIREWALL TWO TIMES   STEP III   RIGHT CLICK ON THIS PC